Skip to content Skip to sidebar Skip to footer
Home / Android / Virtualbox

Test Android App On Virtual Box From Android Studio

Post a Comment
I have a very specific problem. I am trying to create an Android app for educational purposes, together with a friend of mine. The problem is, my processor does not support VT-x, w

Solution 1:

I see I'm a bit late on this one but I figured it out. I am using Windows 8, running Android x86 (4.4 r1) on VirtualBox.

1.Set up a Host-Only adapter so that the VM has access to your network; You can set this up only when the Android image is off. Basically just go into your settings, click on Network, and select Host-Only Adapter in the drop-down labeled Attached to. For Adapter Type select PCnet-FAST III. Check the box next to Cable Connected if it isn't already.

2.Set up an NAT Adapter by selecting a different Adapter tab and for Attached to select NAT. For Adapter Type select PCnet-FAST III again. Check the box next to Cable Connected if it isn't already.

3.Enable Developer Mode by starting up the Android image, then going to Settings > About phone/tablet > Build Number. Click on Build Number 7 times. You should see a pop up that tells you how many more times you need to click to get into Developer mode. Credit to RMP PianoTuning's answer below

4.Get the virtual Android's IP address by going into Settings > About phone/tablet > Status > and then scrolling down until you find your local IP Address. Remember this number, you'll need it for the next step.

5.Start up Android Studio and go into the console; it should be one of the options in the bottom-left corner. Type in adb connect (IP address from step 4). Take a deep breath and hit enter. If it says

connected to (IP address)

you are ready to rock! When you run the app within Android Studio, your virtual Android should appear as Innotek GmbH VirtualBox, or something like the same. Select that puppy and enjoy your new, easy-to-test-on emulator. Its even Bluetooth Compatible! (but thats a whole 'nother story... google it)

Solution 2:

Now a virtualbox isn't an answer to your need.

here are some alternatives,

Genymotion http://www.genymotion.com/ which is an easy to use android emulator , i suggest you look into it. based on virtualbox , can be integrated into android studio with ease . needs an AMD-V proc if not a VT-x . If the processor does not support these, the emulator still works, but your emulated device will only be able to use one CPU.

The other option is adb over wifi, which will let you use your phone without doing the dropbox step http://forum.xda-developers.com/showthread.php?t=1685736. For this to work you will need root though.

Solution 3:

I was able to follow OMiKeY steps and get my app to run in VirtualBox, the part he leaves out:

In your Android simulated device, you have to enable Developer mode. Goto 'Settings' -> About Phone/Tablet->Build Number. click on Build Number 7 times. For me I got pop up that told me how many more times I needed to click to get into Developer mode.

After that i re ran the adb connect XXX.XXX.XXX.XXX command

Solution 4:

Here's how it works for me.

  1. I just connect my android phone with USB to my host (Windows 10).

  2. Then make sure the USB phone is found from within the guest OS (ubuntu desktop 18.04 in VirtualBox 6.0). (VirtualbBox app: Devices > USB > check the USB corresponding to my phone). Once it's recognized by ubuntu, there will be a phone icon showing up on the desktop screen.

  3. Next, I start android studio (v3.3.2); once that is complete, from the Terminal window (Android studio: View > Tool Windows > Terminal), I type in: adb devices, which would list the devices attached and my phone is on the list.

  4. Now I run the app for a test (monitor my phone and confirm if there's prompt)...and the app shows up on my phone. Hope this may of help for others.

Solution 5:

If you are running Windows, open the specific port in Firewall. In VirtualBox in your Android instalation Settings->Network Adapter 2 Tab - Port Fowarding and create a rule with Protocol (TCP) - Host IP (Your IP) - Host Port (in my case 5555) - Guest IP (Same Step 4 - Check your IP ) - Guest Port (I put the 5555 too). Ok! Now I can run my Apps in VM.

AppData\Local\Android\Sdk\platform-tools>adb connect 192.168.0.101 connected to 192.168.0.101:5555

Running devices: innotek GmbH VirtualBox

:-)

Post a Comment for "Test Android App On Virtual Box From Android Studio"